PendoTECH - Products


PendoKIT Configuration Options
Analog Input Options - up to 16 (or more depending on other I/O)
	- External pressure transducers (4-20 mamp or 0-5V output)
	- Disposable pressure sensors with system based calibration - pH (via BNC connector or conductivity probe with on-board based calibration
	- Any device with 0-5V or 0-10V or 4-20 mamp output

Digital Inputs - up to 32 (or more depending on other I/O)
	- Limit switch [can be used to detect expanding tubing or bag]
	- Liquid detector [can be used for leak detection]
	- Bubble detector [can be used for air in tube detection or level control]
	- Disposable in-line flow meter [0.07 – 25 L/min; two standard models available 0.07 - 4.5 L/m with 9/32" HB and 0.66 - 25 L/m with 17/32" HB]; other options possible
RS232 Inputs - up to 6 (or more depending on other I/O)
	- Up to 4 scales [scale reading can be used for vessel weight control/data acq.]
Relay - up to 32 (or more depending on other I/O)
	- Turn on/off pump
	- Open/close pinch valve
	- External alarm notification
	- Solenoid valves

Digital Output - up to 2 (or more depending on other I/O)
	- Panel LEDs

RS232/485 Ports - 6 (or more depending on other I/O)
	- Communication with other devices and data output to data collection system, process control system or Excel via WinWedge software (with set-up provided by PendoTECH and FREE and unlimited technical support , by phone, fax or email, to all registered users by software manufacturer)
Analog Outputs - up to 16 (or more depending on other I/O)
	- Data output via individual channel (versus RS232)
	- Speed control on pump or motor - Other

Please contact us if you have questions on the I/O options,
there may be flexibility for more of one type than listed above depending on
the application.

Please contact us at request@pendotech.com for more information.

Click here to fill out our online form to join our mail list for new product and service updates.